Stapling and Staking

The key to proper installation is stapling or staking the RECP to the soil. The staple rates for slope applications can be found on the Slope Staple Rates page. The staple rates for channel applications can be found on the Channel Staple Rates page. More information on staple and stake types and guidelines is available on the introduction to the RECP Installation DVD.

There are a wide variety of stapling options available. Soil and site conditions, along with the type of product being installed, will determine which anchoring device should be used. An 11-gauge wire staple is often considered the standard anchoring device for temporary degradable RECPs. Biodegradable stakes are available in addition to the typical wire staple. However, in sandy soil conditions a longer, wider staple may be necessary.

The higher the expected flows in a channel or the steeper the slopes, the more staples needed. Staples can be applied either by hand or mechanically using a staple gun. The ECTC recommends that you contact the manufacturer if you have site specific questions regarding the number of staples needed or recommended staple pattern for installation.